Dual-Boot a Sansa e260 with Sandisk OG and Rockbox

Hi, thanks for reading. I’m a friend of Ben’s and he’s letting me put down this post. I run a small electronic music blog at astropope.com. If you have seen the post about how to boost wordpress audio with Amazon S3, then you know we are the guinea pigs to test a new breed of online music blogging.

Pompous? Maybe. Fun? Yes. If you like music as much as we do, you probably want to be wearing it around your neck 24/7. In my case, you want it to listen to on your public transportation commute to work. Right? Or you’re having a hard time transporting 100+ gigs of music to your FreeBSD workstation. I know the feeling.

In this article, I am going to show how to set up your Sansa e260 as a “dual boot” with Sandisk’s original firmware and the Rockbox software.

I am not an expert on the technical differences between MSC or MTP, but in order to install the Rockbox software, you MUST have your Sansa in MSC mode. In Sansa’s original operating software, you will need to navigate to the “Settings” part of the wheel menu. Within there, you will find an option to switch between MCP and MTP. Many Google searches will give you quite intoxicating information of the minute details of both protocols.

The first thing it would be nice for you to do is update the firmware (since mine was refurbished, I had to update the firmware). Download the firmware updater and install it. I cannot always guarantee the accuracy of that link, but if it ever goes down, go to sandisk.com and look around.

Once you have updated what I called the “OG” Sansa software, you are ready to start installing Rockbox. You can begin by going to the install page and selecting the appropriate device.

At the time of this version, we are working with version 3.1 of Rockbox and SanDisk Sansa e200. I tried Option 1, the Automatic Install, but this did not work for me as it constantly claimed it could not detect my Sansa device, so I opted for the manual install.

Download the archive for the Rockbox installation and extract the contents to the root of your Sansa’s file system. For example, H:\.rockbox

Once that has been completed, you can access both the Rockbox software and Sandisk original firmware by installing sansapatcher.exe.

You should now have a pretty sweet “dual booting” mp3 player. Upon reboot, it will default to Rockbox, but you can get to the “OG” by pressing left on the main control.

You have any problems, please let us know!

http://www.sandisk.com

http://www.rockbox.org

 

6 Comments so far

  1. isaac @ March 6th, 2009

    when i try to update my sansa with patcher it says:

    [INFO] Scanning disk devices
    [ERR] No E200s or C200s found, aborting
    [ERR] Please connect your sansa and endure it is in UMS mode
    [ERR] Please refer to the Rockbox manual if you continue to have problems.

    Press ENTER to exit sansapatcher

  2. Dan @ March 6th, 2009

    same as guy above help pls.

  3. iceolate @ March 7th, 2009

    [ERR] No E200s or C200s found, aborting

    Do you have an E200 or C200?

  4. Steve @ March 7th, 2009

    I think the error you are receiving is because the player is not in mtp mode. Once you change that it should work.

  5. isaac @ March 11th, 2009

    there is no mtp mode theres msd and msc

  6. 3d architect studio @ September 22nd, 2014

    3d architect studio

    How-To | benperove.com

Leave a reply

Add this site to your Firefox Search Bar

Twitter Activity

Recent Entries

Topics

Archives

Got WordPress Security?

You will definitely wish you had downloaded my top 5 recommendations when you're cleaning out malicious Javascript from deep within you WordPress site. Enter your email and get the PDF right now, before it's too late.